Looking for an advanced access control solution? Hikvision’s MinMoe Face Recognition Terminals and Iris Recognition Terminals are the perfect choice for enhancing your time attendance system’s security and functionality. With lightning-fast recognition rates, top-level security features, and easy management options, these terminals provide a reliable and efficient solution for various industries. Don’t miss out on the opportunity to upgrade your access control system with Hikvision’s revolutionary MinMoe Face Recognition Terminals today!

In an era where access control is evolving, biometric recognition has become increasingly popular. The use of face recognition in access control and attendance has gained traction due to its touch-free experience. As the technology continued to develop, iris recognition emerged as a new trend, especially for high-security scenarios. To address these needs, Hikvision has introduced MinMoe Face Recognition Terminals and Iris Recognition Terminals, which enhance security and efficiency in access control and time attendance.

Powered by deep learning algorithms and practical functions, Hikvision’s MinMoe terminals offer superior recognition speed of 0.2 seconds with an accuracy rate of over 99%. Equipped with dual lenses, they perform equally well under low or even zero-light environments. The embedded face image anti-spoofing technology boosts the security level at entry points, ensuring all user data is effectively protected. Additionally, the optional privacy protection mode secures users’ personal information.

 

HIKVISION DS-K1T320EFWX Value Series Face Access Terminal

DS-K1T320EFWX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, fingerprint, card (EM card), and PIN, etc.
• Max. 500 faces, 3000 cards, 3000 fingerprints and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wired network and Wi-Fi (AP mode)
• Supports wiring with secure door control unit or card reader via RS-485

HIKVISION DS-K1T321EFWX Value Series Face Access Terminal

DS-K1T321EFWX

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, fingerprint, card (EM card), and PIN, etc.
• Max. 500 faces, 3000 cards, 3000 fingerprints and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wired network and Wi-Fi (AP mode)
• Supports wiring with secure door control unit or card reader via RS-485

 

HIKVISION DS-K1T321EFX Value Series Face Access Terminal

DS-K1T321EFX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, fingerprint, card (EM card), and PIN, etc.
• Max. 500 faces, 3000 cards, 3000 fingerprints and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wiring with secure door control unit or card reader via RS-485

 

HIKVISION DS-K1T321EWX Value Series Face Access Terminal Value Series Face Access Terminal

DS-K1T321EWX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, card (EM card), and PIN, etc.
• Max. 500 faces, 3000 cards, and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wired network and Wi-Fi (AP mode)
• Supports wiring with secure door control unit or card reader via RS-485

HIKVISION DS-K1T321EX Value Series Face Access Terminal

DS-K1T321EX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, card (EM card), and PIN, etc.
• Max. 500 faces, 3000 cards, and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wiring with secure door control unit or card reader via RS-485

HIKVISION DS-K1T321MFWX Value Series Face Access Terminal

DS-K1T321MFWX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, fingerprint, card (M1 card), and PIN, etc.
• Max. 500 faces, 3000 cards, 3000 fingerprints and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wired network and Wi-Fi (AP mode)
• Supports wiring with secure door control unit or card reader via RS-485

HIKVISION DS-K1T321MFX Value Series Face Access Terminal

DS-K1T321MFX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, fingerprint, card (M1 card), and PIN, etc.
• Max. 500 faces, 3000 cards, 3000 fingerprints and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wiring with secure door control unit or card reader via RS-485

HIKVISION DS-K1T321MWX Value Series Face Access Terminal

DS-K1T321MWX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, card (M1 card), and PIN, etc.
• Max. 500 faces, 3000 cards, and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wired network and Wi-Fi (AP mode)
• Supports wiring with secure door control unit or card reader via RS-485

HIKVISION DS-K1T321MX Value Series Face Access Terminal

DS-K1T321MX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, card (M1 card), and PIN, etc.
• Max. 500 faces, 3000 cards, and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wiring with secure door control unit or card reader via RS-485

HIKVISION DS-K1T342DX Value Series Face Access Terminal

DS-K1T342DX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen, 2 Mega pixel wide-angle lens, Built-in Mifare/Felica/DESfire card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

 

HIKVISION DS-K1T342EFWX Value Series Face Access Terminal

DS-K1T342EFWX

Value Series Face Access Terminal

• Max.1500 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in EM card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP, Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

 

HIKVISION DS-K1T342EWX Value Series Face Access Terminal

DS-K1T342EWX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen, 2 Mega pixel wide-angle lens, Built-in EM card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP、Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

HIKVISION DS-K1T342EWX Value Series Face Access Terminal

DS-K1T342EWX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen, 2 Mega pixel wide-angle lens, Built-in EM card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP、Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

HIKVISION DS-K1T342EX Value Series Face Access Terminal

DS-K1T342EX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in EM card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%

 

HIKVISION DS-K1T342MFWX Value Series Face Access Terminal

 

DS-K1T342MFWX

Value Series Face Access Terminal

• Max.1500 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP, Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

 

HIKVISION DS-K1T342MFX Value Series Face Access Terminal

 

DS-K1T342MFX

Value Series Face Access Terminal

• Max.1500 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

 

HIKVISION DS-K1T342MWX Value Series Face Access Terminal

DS-K1T342MWX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP, Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

 

HIKVISION DS-K1T321MX Value Series Face Access Terminal

DS-K1T321MX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, card (M1 card), and PIN, etc.
• Max. 500 faces, 3000 cards, and 150,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the PC web client and mobile web client
• Supports wiring with secure door control unit or card reader via RS-485

DS-K1T342EFWX

Value Series Face Access Terminal

• Max.1500 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in EM card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP, Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

 

HIKVISION DS-K1T342EWX Value Series Face Access Terminal

DS-K1T342EWX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen, 2 Mega pixel wide-angle lens, Built-in EM card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP、Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

HIKVISION DS-K1T342EX Value Series Face Access Terminal

DS-K1T342EX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in EM card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%

HIKVISION DS-K1T342MFWX Value Series Face Access Terminal

DS-K1T342MFWX

Value Series Face Access Terminal

• Max.1500 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP, Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

 

HIKVISION DS-K1T342MFX Value Series Face Access Terminal

 

DS-K1T342MFX

 

Value Series Face Access Terminal

• Max.1500 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

DS-K1T342MWX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP, Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

HIKVISION DS-K1T342MX Value Series Face Access Terminal

DS-K1T342MX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

HIKVISION DS-K1A340FWX Value Series Face Access Terminal

 

DS-K1A340FWX

Value Series Face Access Terminal

• Local time attendance; Remote configuration via web browser
• 4.3-inch touch screen and 2 MP camera
• Face anti-spoofing; Face recognition distance: 0.3m to 1.5m
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Deep learning algorithm
• 1500 face capacity, 3000 fingerprint capacity, and 300,000 attendance records
• Supports ISAPI, ISUP5.0
• Export registered face pictures and events from device via USB interface
• Manage, search and set device data after logging in the device locally

 

HIKVISION DS-K1A340FX Value Series Face Access Terminal

 

DS-K1A340FX

Value Series Face Access Terminal

• Local time attendance
• 4.3-inch touch screen and 2 MP camera
• Face anti-spoofing; Face recognition distance: 0.3m to 1.5m
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Deep learning algorithm
• 1500 face capacity, 3000 fingerprint capacity, and 300,000 attendance records
• Export registered face pictures and events from device via USB interface
• Manage, search and set device data after logging in the device locally

 

HIKVISION DS-K1A340WX Value Series Face Access Terminal

DS-K1A340WX

Value Series Face Access Terminal

• Local time attendance; Remote configuration via web browser
• 4.3-inch touch screen and 2 MP camera
• Face anti-spoofing; Face recognition distance: 0.3 m to 1.5 m
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Deep learning algorithm
• 1500 face capacity, and 300,000 attendance records
• Supports ISAPI, ISUP5.0
• Export registered face pictures and events from device via USB interface
• Manage, search and set device data after logging in the device locally

HIKVISION DS-K1A340X Value Series Face Access Terminal

DS-K1A340X

Value Series Face Access Terminal

• Local time attendance
• 4.3-inch touch screen and 2 MP camera
• Face anti-spoofing; Face recognition distance: 0.3 m to 1.5 m
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Deep learning algorithm
• 1500 face capacity, and 300,000 attendance records
• Export registered face pictures and events from device via USB interface
• Manage, search and set device data after logging in the device locally

 

HIKVISION DS-K1T320EFWX Value Series Face Access Terminal

DS-K1T320EFWX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, fingerprint, card, and PIN, etc
• Supports EM card
• Max. 500 faces, 1,000 cards, 1,000 fingerprints and 100,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the web client

 

DS-K1T320MFWX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, fingerprint, card, and PIN, etc.
• Supports Mifare card
• Max. 500 faces, 1,000 cards, 1,000 fingerprints and 100,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the web client

 

HIKVISION DS-K1T320MFX Value Series Face Access Terminal

DS-K1T320MFX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication modes, including face, fingerprint, card, and PIN, etc.
• Supports Mifare card
• Max. 500 faces, 1,000 cards, 1,000 fingerprints and 100,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the web client

DS-K1T320MWX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication methods, including face, card, and PIN, etc.
• Supports Mifare card
• Face recognition duration < 0.2 s/User
• Max. 500 faces, 1,000 cards, and 100,000 events
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the web client

DS-K1T320MX

Value Series Face Access Terminal

• 2.4-inch LCD screen, 2 MP lens
• Multiple authentication modes, including face, card, and PIN, etc.
• Supports Mifare card
• Max. 500 faces, 1,000 cards, and 100,000 events
• Face recognition duration < 0.2 s/User
• Supports ISAPI and ISUP 5.0 protocols
• Configuration via the web client

HIKVISION DS-K1T331 Value Series Face Access Terminal

DS-K1T331

Value Series Face Access Terminal

• Max.1000 faces capacity
• Supports TCP/IP communication
• Configuration via the web client
• Face Recognition Access Control Terminal, 3.97-inch LCD touch screen,2 Mega pixel wide-angle lens
• Supports ISUP5.0, ISAPI

HIKVISION DS-K1T331W Value Series Face Access Terminal

DS-K1T331W

Value Series Face Access Terminal

• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face Recognition Access Control Terminal, 3.97-inch LCD touch screen,2 Mega pixel wide-angle lens
• Max.1000 faces capacity
• Configuration via the web client
• Supports TCP/IP,Wi-Fi communication
• Supports ISUP5.0, ISAPI

HIKVISION DS-K1T341AM Value Series Face Access Terminal

DS-K1T341AM

Value Series Face Access Terminal

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Max.3000 faces capacity and Max.3000 cards
• Supports TCP/IP
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in M1 card reading module
• Supports ISUP5.0, ISAPI
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 1.5 m
• Two-way audio with client software, indoor station, and main station
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%; IP65

HIKVISION DS-K1T341AMF Value Series Face Access Terminal

DS-K1T341AMF

Value Series Face Access Terminal

• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Max.3000 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in M1 card reading module
• Two-way audio with client software, indoor station, and main station
• Supports TCP/IP
• Supports ISUP5.0, ISAPI
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%; IP65

HIKVISION DS-K1T341CM Value Series Face Access Terminal

DS-K1T341CM

Value Series Face Access Terminal

• Deep learning algorithm
• 4.3-inch capacitive touch screen, 2 MP wide-angle dual-lens
• 3,000 face capacity, 3,000 card capacity, and 150,000 event capacity
• Multiple authentication modes, including face, and card, etc.
• Face recognition duration < 0.2 s/User
• Supports mask wearing detection
• Connects to external access controller or Wiegand card reader via Wiegand protocol
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
• Two-way audio with client software, door station, indoor station, and main station

HIKVISION DS-K1T341CMF Value Series Face Access Terminal

DS-K1T341CMF

Value Series Face Access Terminal

• Deep learning algorithm
• 4.3-inch capacitive touch screen, 2 MP wide-angle dual-lens
• 3,000 face capacity, 3,000 card capacity, 3,000 fingerprint capacity and 150,000 event capacity
• Multiple authentication modes, including face, fingerprint and card, etc.
• Face recognition duration < 0.2 s/User
• Supports mask wearing detection
• Connects to external access controller or Wiegand card reader via Wiegand protocol
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
• Two-way audio with client software, door station, indoor station, and main station

HIKVISION DS-K1T341CMFW Value Series Face Access Terminal

DS-K1T341CMFW

Value Series Face Access Terminal

• Deep learning algorithm
• 4.3-inch capacitive touch screen, 2 MP wide-angle dual-lens
• 3,000 face capacity, 3,000 card capacity, 3,000 fingerprint capacity and 150,000 event capacity
• Multiple authentication modes, including face, fingerprint and card, etc.
• Face recognition duration < 0.2 s/User
• Supports mask wearing detection
• Connects to external access controller or Wiegand card reader via Wiegand protocol
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
• Two-way audio with client software, door station, indoor station, and main station

HIKVISION DS-K1T341CMW Value Series Face Access Terminal

DS-K1T341CMW

Value Series Face Access Terminal

• Deep learning algorithm
• 4.3-inch capacitive touch screen, 2 MP wide-angle dual-lens
• 3,000 face capacity, 3,000 card capacity, and 150,000 event capacity
• Multiple authentication modes, including face, and card, etc.
• Face recognition duration < 0.2 s/User
• Supports mask wearing detection
• Connects to external access controller or Wiegand card reader via Wiegand protocol
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
• Two-way audio with client software, door station, indoor station, and main station

HIKVISION DS-K1T341CMW Value Series Face Access Terminal

DS-K1T341CMW

Value Series Face Access Terminal

• Deep learning algorithm
• 4.3-inch capacitive touch screen, 2 MP wide-angle dual-lens
• 3,000 face capacity, 3,000 card capacity, and 150,000 event capacity
• Multiple authentication modes, including face, and card, etc.
• Face recognition duration < 0.2 s/User
• Supports mask wearing detection
• Connects to external access controller or Wiegand card reader via Wiegand protocol
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
• Two-way audio with client software, door station, indoor station, and main station

 

HIKVISION DS-K1T342DWX Value Series Face Access Terminal

DS-K1T342DWX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens, Built-in Mifare/Felica/DESfire card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP, Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face Recognition Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%
• Supports mask recognition

DS-K1T343EFWX

DS-K1T343EFX

DS-K1T343EWX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen, 2 Mega pixel wide-angle lens, Built-in EM card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP、Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%

HIKVISION DS-K1T343EX Value Series Face Access Terminal

DS-K1T343EX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in EM card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%

HIKVISION DS-K1T343MFWX Value Series Face Access Terminal

 

DS-K1T343MFWX

Value Series Face Access Terminal

• Max.1500 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP, Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%

HIKVISION DS-K1T343MFX Value Series Face Access Terminal

DS-K1T343MFX

Value Series Face Access Terminal

• Max.1500 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%

 

HIKVISION DS-K1T343MWX Value Series Face Access Terminal

DS-K1T343MWX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP, Wi-Fi
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%

HIKVISION DS-K1T343MX Value Series Face Access Terminal

DS-K1T343MX

Value Series Face Access Terminal

• Max.1500 faces capacity, and Max.3000 cards
• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Two-way audio with client software, indoor station, and main station; Supports TCP/IP
• Supports ISAPI, ISUP5.0
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 1.5 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%

 

 

 

Pro Series

---

HIKVISION DS-K1T642E Pro Series Face Recognition Terminals

DS-K1T642E

Pro Series Face Recognition Terminals

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition distance: 0.3 m to 3 m
• Max. 6000 faces capacity, Max.10,000 cards, and Max. 150,000 event capacity
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Two-way audio with indoor station and main station
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Remotely opens door and starts live view via Hik-Connect
• Supports ISAPI and ISUP5.0 protocol
• Configuration via the web client

 

HIKVISION DS-K1T642EF Pro Series Face Recognition Terminals

DS-K1T642EF

Pro Series Face Recognition Terminals

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition distance: 0.3 m to 3 m
• Max. 6000 faces capacity, Max. 5000 fingerprints capacity, Max.10,000 cards, and Max. 150,000 event capacity
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Two-way audio with indoor station and main station
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Remotely opens door and starts live view via Hik-Connect
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol

HIKVISION DS-K1T642EFW Pro Series Face Recognition Terminals

DS-K1T642EFW

Pro Series Face Recognition Terminals

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition distance: 0.3 m to 3 m
• Max. 6000 faces capacity, Max. 5000 fingerprints capacity, Max.10,000 cards, and Max. 150,000 event capacity
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Two-way audio with indoor station and main station
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Remotely opens door and starts live view via Hik-Connect
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol

HIKVISION DS-K1T642EW Pro Series Face Recognition Terminals

DS-K1T642EW

Pro Series Face Recognition Terminals

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition distance: 0.3 m to 3 m
• Max. 6000 faces capacity, Max.10,000 cards, and Max. 150,000 event capacity
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Two-way audio with indoor station and main station
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Remotely opens door and starts live view via Hik-Connect
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol

HIKVISION DS-K1T642M Pro Series Face Recognition Terminals

DS-K1T642M

Pro Series Face Recognition Terminals

• Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
• Max.6,000 faces capacity, Max.10,000 cards
• Two-way audio with client software, indoor station, and master stationSupports TCP/IP；Supports Ehome5.0, ISAPI
• Configuration via the web client
• Face recognition. Distance: 0.3 m to 3 m
• Duration ＜ 0.2 s/User
• Accuracy rate ≥ 99%；

HIKVISION DS-K1T642MF Pro Series Face Recognition Terminals

DS-K1T642MF

Pro Series Face Recognition Terminals

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition distance: 0.3 m to 3 m
• Max. 6000 faces capacity, Max. 5000 fingerprints capacity, Max.10,000 cards, and Max. 150,000 event capacity
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Two-way audio with indoor station and main station
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Remotely opens door and starts live view via Hik-Connect
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol

HIKVISION DS-K1T642MFW Pro Series Face Recognition Terminals

DS-K1T642MFW

Pro Series Face Recognition Terminals

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition distance: 0.3 m to 3 m
• Max. 6000 faces capacity, Max. 5000 fingerprints capacity, Max.10,000 cards, and Max. 150,000 event capacity
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Two-way audio with indoor station and main station
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Remotely opens door and starts live view via Hik-Connect
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol

HIKVISION DS-K1T642MW Pro Series Face Recognition Terminals

 

DS-K1T642MW

Pro Series Face Recognition Terminals

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition distance: 0.3 m to 3 m
• Max. 6,000 face capacity, Max. 10,000 card capacity, and Max. 150,000 event capacity
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Two-way audio with indoor station and main station
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Remotely opens door and starts live view via Hik-Connect
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol

HIKVISION DS-K1T671M Pro Face Access Terminal

DS-K1T671M

Pro Face Access Terminal

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• 7-inch LCD touch screen, 2 Mega pixel wide-angle lens, built-in Mifare card reading module
• Face recognition distance (without face mask): 0.3 m to 3 m, Duration ＜ 0.2 s/User, Accuracy rate ≥ 99%
• Max.6000 faces, Max.6000 cards
• Two-way audio with client software, indoor station, and mainstation
• Supports TCP/IP
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol
• IP65

 

HIKVISION DS-K1T671MF Pro Face Access Terminal

DS-K1T671MF

Pro Face Access Terminal

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• 7-inch LCD touch screen, 2 Mega pixel wide-angle lens, built-in M1 card reading module
• Face recognition distance (without face mask): 0.3 m to 3 m, Duration ＜ 0.2 s/User, Accuracy rate ≥ 99%
• Max.6000 faces, Max.6000 cards and Max. 5000 fingerprints
• Two-way audio with client software,indoor station, and main station
• Supports TCP/IP
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol
• IP65

HIKVISION DS-K1T673DWX Pro Face Access Terminal

DS-K1T673DWX

Pro Face Access Terminal

• 7-inch LCD touch screen,2 Mega pixel wide-angle lens
• Recognition distance: 0.3 to 3 m
• Face recognition duration ＜ 0.2 s/User
• Built-in Mifare card, Felica card, and DESfire card reading module (Presents card on the screen to authenticate)
• Face recognition accuracy rate ≥ 99%
• Face mask detection
• 10,000 face capacity, 10,000 fingerprint capacity (With fingerprint module), 50,000 card capacity, and 150,000 event capacity
• Supports ISAPI, ISUP 5.0, TCP/IP (IPv4 and IPv6)
• Supports single person and multiple people (Up to 5 people) recognition

 

HIKVISION DS-K1T673DX Pro Face Access Terminal

DS-K1T673DX

Pro Face Access Terminal

• 7-inch LCD touch screen,2 Mega pixel wide-angle lens
• Recognition distance: 0.3 to 3 m
• Face recognition duration ＜ 0.2 s/User
• Face recognition accuracy rate ≥ 99%
• Built-in Mifare card, Felica card, and DESfire card reading module (Presents card on the screen to authenticate)
• Face mask detection
• 10,000 face capacity, 10,000 fingerprint capacity (With fingerprint module), 50,000 card capacity, and 150,000 event capacity
• Supports ISAPI, ISUP 5.0, TCP/IP (IPv4 and IPv6)
• Supports single person and multiple people (Up to 5 people) recognition

HIKVISION DS-K1TA70MI-T Pro Face Access Terminal

 

DS-K1TA70MI-T

Pro Face Access Terminal

• Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
• Recognition distance: 0.3 to 1.8 m
• Face mask detection
• Displays temperature measurement results on the authentication page
• 7-inch LCD touch screen,2 Mega pixel wide-angle lens Built-in Mifare card reading module
• Face recognition duration ＜ 0.2 s/User
• Face recognition accuracy rate ≥ 99%
• 6000 face capacity, 6000 card capacity, and 100,000 event capacity

 

Ultra Series

*************************************

HIKVISION DS-K1T671TM-3XF Ultra Face Recognition Terminals

 

DS-K1T671TM-3XF

Ultra Face Recognition Terminals

• Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
• Recognition distance: 0.3 to 2 m
• Face mask detection
• Displays temperature measurement results on the authentication page
• 7-inch LCD touch screen,2 Mega pixel wide-angle lens
• Built-in Mifare card reading module
• Face recognition duration ＜ 0.2 s/User
• face recognition accuracy rate ≥ 99%
• 50,000 face capacity, 50,000 card capacity, and 100,000 event capacity

 

HIKVISION DS-K1T671TMFW Ultra Face Recognition Terminals

DS-K1T671TMFW

Ultra Face Recognition Terminals

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• 7-inch LCD touch screen, 2 Mega pixel wide-angle lens, built-in M1 card reading module
• Face recognition distance (without face mask): 0.3 m to 3 m, Duration ＜ 0.2 s/User, Accuracy rate ≥ 99%
• Max. 50,000 faces capacity, Max. 5000 fingerprints capacity, and Max. 50,000 cards
• Two-way audio with client software,indoor station, and main station
• Supports TCP/IP,Wi-Fi
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol
• IP65

 

HIKVISION DS-K1T671TMW Ultra Face Recognition Terminals

 

DS-K1T671TMW

Ultra Face Recognition Terminals

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• 7-inch LCD touch screen, 2 Mega pixel wide-angle lens, built-in M1 card reading module
• Face recognition distance (without face mask): 0.3 m to 3 m, Duration ＜ 0.2 s/User, Accuracy rate ≥ 99%
• Max. 50,000 faces, Max. 50,000 cards
• Two-way audio with client software,indoor station, and main station
• Supports TCP/IP,Wi-Fi
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol
• IP65

 

HIKVISION DS-K1T672E Ultra Series Wall-Mounted Face Access Terminal

DS-K1T672E

Ultra Series Wall-Mounted Face Access Terminal

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• 7-inch touch screen with bezel-less design
• Presents card on the screen to authenticate card permission
• Face recognition. Distance: 0.3 m to 3 m, Duration ＜ 0.2 s/User, Accuracy rate ≥ 99%
• 50,000 face capacity, 50,000 card capacity（EM card）, and 50,000 event capacity
• Supports wiegand protocol and RS-485 protocol
• Two-way audio with indoor station and main station
• Supports ISAPI and ISUP5.0 protocol
• Configuration via the web client

HIKVISION DS-K1T672E Ultra Series Wall-Mounted Face Access Terminal

DS-K1T672E

Ultra Series Wall-Mounted Face Access Terminal

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• 7-inch touch screen with bezel-less design
• Presents card on the screen to authenticate card permission
• Face recognition. Distance: 0.3 m to 3 m, Duration ＜ 0.2 s/User, Accuracy rate ≥ 99%
• 50,000 face capacity, 50,000 card capacity（EM card）, and 50,000 event capacity
• Supports wiegand protocol and RS-485 protocol
• Two-way audio with indoor station and main station
• Supports ISAPI and ISUP5.0 protocol
• Configuration via the web client

 

HIKVISION DS-K1T672M Ultra Series Wall-Mounted Face Access Terminal

DS-K1T672M

Ultra Series Wall-Mounted Face Access Terminal

• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• 7-inch touch screen with bezel-less design
• Presents card on the screen to authenticate card permission
• Face recognition distance: 0.3 m to 3 m
• 50,000 face capacity, 50,000 card capacity, and 50,000 event capacity
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Connects to one external card reader via RS-485 protocol
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
• Connects to external access controller or Wiegand card reader via Wiegand protocol
• Two-way audio with indoor station and master station
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Configuration via the web client
• Remotely opens door and starts live view via Hik-Connect
• Supports ISAPI and EHome 5.0 protocol
• Supports multiple languages: English, Thai, Russian, Spanish, Arabic, Indonesian, and Vietnamese
• Self-defined voice prompt of authentication result

 

HIKVISION DS-K1T672MW Ultra Series Wall-Mounted Face Access Terminal

DS-K1T672MW

Ultra Series Wall-Mounted Face Access Terminal

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• 7-inch touch screen with bezel-less design
• Presents card on the screen to authenticate card permission
• Face recognition. Distance: 0.3 m to 3 m, Duration ＜ 0.2 s/User, Accuracy rate ≥ 99%50,000 face capacity, 50,000 card capacity（M1 card）, and 50,000 event capacity
• Supports wiegand protocol and RS-485 protocol
• Two-way audio with indoor station and main station
• Configuration via the web client
• Supports ISAPI and ISUP5.0 protocol

 

HIKVISION DS-K1T673TDWX Ultra Series Face Access Terminal

DS-K1T673TDWX

Ultra Series Face Access Terminal

• 7-inch LCD touch screen,2 Mega pixel wide-angle lens
• Recognition distance: 0.3 to 3 m
• Face recognition duration ＜ 0.2 s/User
• Face recognition accuracy rate ≥ 99%
• Built-in Mifare card, Felica card, and DESfire card reading module (Presents card on the screen to authenticate)
• Face mask detection
• 100,000 face capacity, 10,000 fingerprint capacity (With fingerprint module), 500,000 card capacity, and 150,000 event capacity
• Supports ISAPI, ISUP 5.0, TCP/IP (IPv4 and IPv6)
• Supports single person and multiple people (Up to 5 people) recognition

 

HIKVISION DS-K1T680D-E1 Ultra Series Wall-Mounted Face Access Terminal

DS-K1T680D-E1

Ultra Series Wall-Mounted Face Access Terminal

• 8-inch touch screen with bezel-less design
• Presents card on the screen to authenticate
• Face recognition distance: 0.3 m to 3 m, duration ＜ 0.2 s/User, accuracy rate ≥ 99%
• 100,000 face capacity, 100,000 card capacity (Felica, DESfire, M1), and 150,000 event capacity
• Supports ISAPI, ISUP 5.0, Wiegand, RS-485, TCP/IP, and PoE
• Two-way audio with indoor station and main station
• Configuration via the web client and mobile client
• Customizes attendance status name

 

HIKVISION DS-K1T680DFG Ultra Series Wall-Mounted Face Access Terminal

DS-K1T680DFG

Ultra Series Wall-Mounted Face Access Terminal

• 8-inch touch screen with bezel-less design
• Presents card on the screen to authenticate
• Face recognition distance: 0.3 m to 3 m, duration ＜ 0.2 s/User, accuracy rate ≥ 99%
• 100,000 face capacity, 100,000 card capacity (Felica, DESfire, M1), 10,000 fingerprint capacity, and 150,000 event capacity
• Supports ISAPI, ISUP 5.0, Wiegand, RS-485, TCP/IP, 3G/4G
• Two-way audio with indoor station and master station
• Configuration via the web client and mobile client
• Customizes attendance status name

 

HIKVISION DS-K1T680DFW Ultra Series Wall-Mounted Face Access Terminal

DS-K1T680DFW

Ultra Series Wall-Mounted Face Access Terminal

• 8-inch touch screen with bezel-less design
• Presents card on the screen to authenticate
• Face recognition distance: 0.3 m to 3 m, duration ＜ 0.2 s/User, accuracy rate ≥ 99%
• 100,000 face capacity, 100,000 card capacity (Felica, DESfire, M1), 10,000 fingerprint capacity, and 150,000 event capacity
• Supports ISAPI, ISUP 5.0, Wiegand, RS-485, TCP/IP, Wi-Fi
• Two-way audio with indoor station and main station
• Configuration via the web client and mobile client
• Customizes attendance status name

HIKVISION DS-K1T680DG Ultra Series Wall-Mounted Face Access Terminal

DS-K1T680DG

Ultra Series Wall-Mounted Face Access Terminal

• 8-inch touch screen with bezel-less design
• Presents card on the screen to authenticate
• Face recognition distance: 0.3 m to 3 m, duration ＜ 0.2 s/User, accuracy rate ≥ 99%
• 100,000 face capacity, 100,000 card capacity (Felica, DESfire, M1), and 150,000 event capacity
• Supports ISAPI, ISUP 5.0, Wiegand, RS-485, TCP/IP, 3G/4G
• Two-way audio with indoor station and main station
• Configuration via the web client and mobile client
• Customizes attendance status name

DS-K1T680DW

Ultra Series Wall-Mounted Face Access Terminal

• 8-inch touch screen with bezel-less design
• Presents card on the screen to authenticate
• Face recognition distance: 0.3 m to 3 m, duration ＜ 0.2 s/User, accuracy rate ≥ 99%
• 100,000 face capacity, 100,000 card capacity (Felica, DESfire, M1), and 150,000 event capacity
• Supports ISAPI, ISUP 5.0, Wiegand, RS-485, TCP/IP, Wi-Fi
• Two-way audio with indoor station and main station
• Configuration via the web client and mobile client
• Customizes attendance status name

HIKVISION DS-K1T681DBWX Face Recognition Terminals

DS-K1T681DBWX

Face Recognition Terminals

• Android 11 operation system
• 8-inch LCD touch screen, 2 MP wide-angle lens
• Face recognition duration ＜ 0.2 s/User, face recognition accuracy rate ≥ 99%
• Built-in M1 card, Felica card, and DESfire card reading module (Presents card on the screen to authenticate)
• Face mask detection
• 100,000 face capacity, 10,000 fingerprint capacity (with fingerprint module), 500,000 card capacity, and 500,000 event capacity
• Supports ISAPI, ISUP 5.0, TCP/IP
• Supports face recognition of single person and multiple people (up to 5 people)
• Recognition distance: 0.3 to 3 m

 

HIKVISION DS-K1T681DBX Face Recognition Terminals

DS-K1T681DBX

Face Recognition Terminals

• Android 11 operation system
• 8-inch LCD touch screen, 2 MP wide-angle lens
• Face recognition duration ＜ 0.2 s/User, face recognition accuracy rate ≥ 99%
• Built-in M1 card, Felica card, and DESfire card reading module (Presents card on the screen to authenticate)
• Face mask detection
• 100,000 face capacity, 10,000 fingerprint capacity (with fingerprint module), 500,000 card capacity, and 500,000 event capacity
• Supports ISAPI, ISUP 5.0, TCP/IP
• Supports face recognition of single person and multiple people (up to 5 people)
• Recognition distance: 0.3 to 3 m

 

HIKVISION DS-K5604A-3XF/V Ultra Face Recognition Terminals

DS-K5604A-3XF/V

Ultra Face Recognition Terminals

• Plug & play
• Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
• Recognition distance: 0.3 to 2 m
• Face mask detection
• Displays temperature measurement results on the authentication page
• 10.1-inch LCD touch screen,2 Mega pixel wide-angle lens
• 50,000 face capacity and 100,000 event capacity
• Face recognition duration ＜ 0.2 s/User
• Face recognition accuracy rate ≥ 99%

DS-K5671-ZH

Face Recognition Module For Turnstile

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition terminal for turnstile
• Built-in IO output or Wiegand output to communicate with the third-party turnstile
• 7 inch LCD Touch Screen, 2 M camera
• Max. 50,000 faces, and Max. 100,000 events
• Face recognition distance: 0.3 m to 3 m; Face recognition duration ＜ 0.2 s/User; Accuracy rate ≥ 99%
• TCP/IP, Wi-Fi communication
• Remote live view via RTSP protocol
• Indoor use

HIKVISION DS-K5671-ZU Face Recognition Module For Turnstile

DS-K5671-ZU

Face Recognition Module For Turnstile

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition terminal for turnstile
• Built-in IO output or Wiegand output to communicate with the third-party turnstile
• 7 inch LCD Touch Screen, 2 M camera
• Max. 50,000 faces, and Max. 100,000 events
• Face recognition distance: 0.3 m to 3 m; Face recognition duration ＜ 0.2 s/User; Accuracy rate ≥ 99%
• TCP/IP, Wi-Fi communication
• Remote live view via RTSP protocol
• IP65

HIKVISION DS-K5671-ZV Face Recognition Module For Turnstile

DS-K5671-ZV

Face Recognition Module For Turnstile

• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Face recognition terminal for turnstile
• Built-in IO output or Wiegand output to communicate with the third-party turnstile
• 7 inch LCD Touch Screen, 2 M camera
• Max. 50,000 faces, and Max. 100,000 events
• Face recognition distance: 0.3 m to 3 m; Face recognition duration ＜ 0.2 s/User; Accuracy rate ≥ 99%
• TCP/IP, Wi-Fi communication
• Remote live view via RTSP protocol
• IP65

HIKVISION DS-K5671-W Face Recognition Module For Turnstile

DS-K5671-W

Face Recognition Module For Turnstile

• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Compatible with Hikvision turnstile
• Communicates with the third-party turnstile via IO output or Wiegand
• Water-proof
• 7-inch LCD touch screen
• 2 MP wide-angle dual lens
• Adjustable supplement light brightness
• Face recognition distance: 0.3 m to 3 m
• High performance processor with deep learning algorithm
• Face capacity: 50,000
• Face recognition duration＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Multiple authentication modes
• Applies pictures to the device via TCP/IP or uploading them to the device via the USB flash drive
• Transmits and saves the comparison results and the captured pictures to the client software or others
• Stand-alone operation
• Connects to one external card reader via RS-485 protocol
• Remote live view via RTSP protocol; encoding mode: H.264
• Voice prompts
• Connects to Wiegand card reader via Wiegand protocol
• Two-way audio with client software, indoor station, and master station
• NTP, manually time synchronization, and auto synchronization
• Supports 6 attendence status, including check in, check out, break in, break out, overtime in, overtime out
• Watchdog design for protecting the device and ensuring device running properly
• Supports multiple languages: English, Spanish, Arabic, Thai, Indonesian, Russian, and Vietnamese
• Device management, log search, and parameter settings via the device
• Supports EHome 5.0 (ISUP 5.0), and ISAPI protocol
• Configuration via web browser

 

HIKVISION DS-K1A8503EF K1A8503 Value Series Fingerprint Time Attendance Terminal

DS-K1A8503EF

K1T8003 Value Series Fingerprint Time Attendance Terminal

• 2.4-inch LCD Display Fingerprint Access Control Terminal
• Communication: TCP/IP，ISUP5.0 ； 1000 users, 1000 fingerprints and Max. 100,000 event records
• Support Access Control and Time Attendance Function, Optical Fingerprint Module
• Remotely opens door via Hik-Connect mobile client；Tamper alarm.

 

HIKVISION DS-K5032-3XFD Pro Series Visitor Terminal

DS-K5032-3XFD

Pro Series Visitor Terminal

• Android operation system with dual-screen design.
• Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
• Recognition distance: 0.3 to 2 m
• Fast temperature measurement for visitor
• Paperless visitor enrollment.
• TCP/IP and Wi-Fi are available for networking application.
• Up to 150,000 visitor records can be stored on the device.

HIKVISION DS-K1T201AMF Pro Series Fingerprint Terminal

DS-K1T201AMF

Pro Series Fingerprint Terminal

• Fingerprint Access Control Terminal
• 2.8-inch LCD display screen
• 5000 fingerprints, 100,000 cards（Mifare card）, 300,000 events storage
• Communication via TCP/TP and Wi-Fi
• RS-485 and Wiegand interface
• ISUP5.0、ISAPI

With multiple access methods available, including card, PIN code, fingerprint, face, and iris, the MinMoe terminals support quick and easy registration via multiple access methods. The device configuration is also conveniently managed through web or GUI. Users can remotely control their devices via the Hik-Connect App on their smartphones, providing live view unlocking, event log checking, and more.

MinMoe Terminals feature extensive functionality with centralized management. Users enjoy flexible access control management with multiple authentication methods to choose from. In addition, they have convenient video intercom capabilities via indoor stations or mobile apps. Remotely checking live view is also possible via various platforms like Hik-Connect App, HikCentral Access Control platform, or HikCentral Professional OpenAPI.

For third-party software developers, MinMoe Face Recognition Terminals provide ideal integration options with diverse systems and applications for access control or time & attendance. With five helpful methods available for integration, including Intelligent Security API, Access Control Gateway API, Hik-ProConnect OpenAPI, HikCentral Professional OpenAPI, and HikCentral Professional Database/CSV/TXT, developers can create tailored solutions based on the MinMoe terminals.

Furthermore, Hikvision offers joint-value solutions with technology partners worldwide who have already launched industry-proven solutions based on the MinMoe terminals. With flexible solutions and impeccable quality, users can choose any combination of identification sensors and build their own barrier gate solution. These swing gates are designed and manufactured in-house by Hikvision and offer the best-in-class quality and highest efficiency.

Hikvision also offers advanced features such as facial recognition terminals that store up to 50,000 faces and provide instant verification within 0.2 seconds. These terminals work efficiently under various lighting conditions and can recognize faces even against harsh backlight. They are capable of distinguishing live human faces from pictures and videos and meet the SUS304 standard. The swing gate products can be installed with various identification sensors such as intelligent card readers, fingerprint readers, and the facial recognition terminal (DS-K5671) with Hikvision’s proprietary algorithm.

To cater to specific needs, Hikvision provides proper solutions or customized combinations of solutions that fit perfectly. The card reader supports RS485 and standard Wiegand 26/34 interfaces while the barrier gate supports either standard Wiegand interface or RS485 interfaces.

For more advanced features, Hikvision’s MinMoe Facial Recognition Terminal DS-K5671-Z integrates with the Hik-Central Professional management platform, allowing for alarm linkage, anti-passback, and other advanced features. This intelligent facial recognition access control solution can be customized with adjustable swing gate direction and operating modes to fit various throughput requirements. It also features automatic unlocking if the power is interrupted and works offline with remote management via software.

Hikvision’s MinMoe Face Recognition Terminals and Iris Recognition Terminals offer an intelligent and efficient solution for enhancing security and streamlining access control processes. With their advanced features and flexibility, they cater to various industries and applications. By incorporating face recognition technology into access control systems, organizations can achieve heightened security measures while improving user experience.

 

 

Access control and attendance have come a long way from traditional methods such as using keys, pin codes, cards, and fingerprints. The advancement in biometric recognition, particularly face recognition, has gained popularity in the market due to its touch-free experience. With the development of advanced deep learning algorithms and practical functions, Hikvision introduces MinMoe Face Recognition Terminals and Iris Recognition Terminals, revolutionizing access control and time attendance systems. These terminals offer superior recognition in any environment, top-level security, easy management, and extensive functionality.

Superior Recognition in Any Environment:
The MinMoe Face Recognition Terminals powered by deep learning algorithms deliver an amazing recognition speed of 0.2 seconds with an accuracy rate of over 99%. Equipped with dual lenses, these terminals perform equally well under low or even zero-light environments. The embedded face image anti-spoofing technology enhances the security level at entry points, ensuring all user data is encrypted for effective information protection. Additionally, the optional privacy protection mode safeguards users’ personal information.

Top-Level Security:
Hikvision MinMoe Face Recognition Terminals are designed with the latest security measures. The embedded face image anti-spoofing technology boosts the security level at entry points. All user data is encrypted for effective information protection, and the optional privacy protection mode also secures users’ personal information.

Easy Management and Operation:
These terminals support quick and easy registration via multiple access methods, including card, PIN code, fingerprint, face, and iris. They are also conveniently managed through web or GUI configuration. Moreover, users can remotely check live view, unlock doors, check event logs, and more via the Hik-Connect App on their smartphones.

Extensive Functionality via One Device:
The MinMoe Terminal features extensive functionality with centralized management. Users can enjoy flexible access control management with multiple authentication methods to choose from, such as face, card, PIN code, and fingerprint. Furthermore, users can conveniently use video intercom features via indoor station or mobile Hik-Connect App. The MinMoe Terminal also allows remotely checking live view via indoor station, Hik-Connect mobile App, or HikCentral Access Control platform.

Integration with Third-Parties:
MinMoe Face Recognition Terminals are ideal for third-party software developers to integrate with their systems and applications for access control or time & attendance. With five helpful integration methods available – Intelligent Security API, Access Control Gateway API, Hik-ProConnect OpenAPI, HikCentral Professional OpenAPI, and HikCentral Professional Database/CSV/TXT – integrating these terminals into existing systems is seamless.

Joint-value Solutions:
Hikvision offers joint-value solutions with various identification sensors, allowing customers to build their own barrier gate solution. The swing gates manufactured in-house by Hikvision offer high-quality and efficiency. Options include Fingerprint Readers that store up to 5,000 fingerprints and provide instant verification within 1 second. Facial Recognition Terminals store up to 50,000 faces and provide instant verification within 0.2 seconds. These terminals can recognize faces even in harsh backlight conditions and distinguish live human faces from pictures and videos. The stainless steel used in the manufacturing meets the SUS304 standard and comes with anti-crash protection. The Barrier Gate Products can be installed with various identification sensors such as intelligent Card Readers, fingerprint readers, and the Facial Recognition Terminal (DS-K5671) with Hikvision’s proprietary algorithm.

Advanced Features:
For advanced features such as alarm linkage, anti-passback, and more, users can access the Hik-Central Professional management platform. Combining the Barrier Gate with the Face Recognition Terminal through RS485, Wiegand, or I/O signal provides an intelligent facial recognition access control solution. Customizable swing gate directions and operating modes are also available to meet specific needs.

Conclusion:
Hikvision’s MinMoe Face Recognition Terminals and Iris Recognition Terminals offer an impressive array of features designed to enhance access control and time attendance systems. With superior recognition capabilities, top-level security measures, easy management and operation, and extensive functionality, these terminals cater to various industries’ needs. By integrating with third-party software developers, customers can create tailored solutions to fit their unique requirements. With Hikvision’s commitment to providing cutting-edge technology and exceptional customer service, these terminals are a must-have for any organization seeking to upgrade their access control system.

 

About Author